No 406 MHz EPIRB should be programmed using 98 or 97. The EPIRB may be coded with a serial identity (rather than an MMSI identity), using Serial Location Protocol or Serial User Protocol as stated 406 MHz EPIRB comply with specification and the requirements of the Maritime Administration and Maritime Register of Shipping ARB-M allowed to be used as emergency equipment on _____ (ship name) The identification number of the tested EPIRB complies with the EPIRB registration number in Mission Control Center (MCC). Testing company representative Hello friendsI am RAHMUDDIN ANSARIFrom Siwan Patna BiharMy channel name- Sailor AnsariPlease subscriber my channelMy channel link :- https://www.youtube.com/ EPIRB / SART / 2 Way R/T. Moloobhoys are market leaders in India for the locator beacons segment with over 65% market share. We stock EPIRBs & SARTs from major companies like ACR / Artex, Jotron & McMurdo. All. An AIS-SART, being an AIS transmitter, has a unique identi er, (an MMSI) using the format 970xxyyyy, where xx is the manufacturer ID from 01 to 99 and yyyy is the sequence number assigned by the manufacturer from 0000 to 9999. (The manufacturer ID xx = 00 is reserved for test purposes.) The MMSIs of AIS-SARTs are not recorded by the ITU or Peel the rubber casing off one end to expose the wire connecting them. 11. Cut the wire connecting the two batteries to avoid a short. Remove the batteries entirely from the rigid casing and separate. 12. You can take the rope off the EPIRB casing and retain the stainless steel screws to re-use if you wish. bXyz.

how to use epirb and sart